The large, easy-to-use control panel allows the operator to quickly change the speed, pressure, plot mode and other settings, perform test cuts, and much more.
OPOS-X contour cutting alignment enables you to die-cut valuable printed vinyl graphics with complete confidence and ease.
The newly designed high-speed cutting head features incredible accuracy for reliable and effortless vinyl cutting.
Integrated media rollers and roll end flanges load vinyl straight and keep media on track, even when cutting at top speed.
CUTTING TYPE: Drag knife with TurboCut and Tangential Emulation Modes
TOOL COMPATIBILITY: Blade, Pen, Pounce Tool
CUTTING WIDTH: 29 inch (74 cm)
CUTTING SPEED: All SummaCut models cut at speeds up to 44 inches per second (113 cps) diagonal
AXIAL SPEED: Up to 2 G
ALIGNMENT TYPE: OPOS X, Barcode job recognition, Up to 2 x 64 marks on the X-line, Y-Line compensation
MAXIMUM ACCELERATION: Up to 3 G diagonal
Within +/- 0.004 in. (+/- 0.1 mm) on plots up to 26 ft. (8 m) long on rolls up to 760 mm wide
Within +/- 0.004 in. (+/- 0.1 mm) on plots up to 13 ft. (4 m) long on rolls over 760 mm wide
CUTTING FORCE: 0-400 grams of down-force, in 5 gram increments
REPLOT MEMORY: 4 MB (buffer size: 16 MB)
DISPLAY LANGUAGES: English; French; German; Dutch; Italian; Spanish; Polish; Lithuanian
CONNECTIVITY: USB, Serial RS232
POWER REQUIREMENTS: 100-120 / 220-240 VAC, 50/60 Hz, 85 VA maximum
DIMENSIONS: 45 (W) x 13 (D) x 11 (H) in. (115 (W) x 35 (D) x 30 (H) cm)
WEIGHT: 37 lbs (17 kg)
OPERATING TEMPERATURE: 59˚ to 95˚F (15˚ to 35˚C)
STANDARD ACCESSORIES: WinPlot or MacSign Cut Software, CutterControl Parameter Software, CD w/ Manuals and Drivers, Quick Start Guide, Power Cable, USB Cable, Media Guide Flanges (set of 2), 1 Spare Fuse, Standard 36˚ Blade Holder, 2 Standard 36˚ Blades, Cut-off Knife (Manual Slitter), 2 Cut-off Razor Blades.
OPTIONAL ACCESSORIES: Stand or Basket for SummaCut D75
WARRANTY: 2 year Warranty on Parts