The CG-FXII Plus Series cutters feature high speed, continuous crop mark detection for precise contour cutting. A proprietary half cut function leaves a small bit of backing sheet at connecting points for easier handling. An over cut function makes a cross cut at the start and end positions, resulting in sharp edges with no undercut fragments. These models are ideal for producing decals, stickers, cut-vinyl signs and more.
Call to get a quote on promo pricing.
Roll-based cutting plotter
CG-130FXII: 62" (1580 mm)CG-130AR: 74" (1880 mm)
CG-130FXII: 51.2" (1300 mm)CG-130AR: 62.9" (1600 mm)
Recommended sheets up to 0.01" (.25mm) including laminate and liner; Up to 0.04" (1mm) max (results may vary)
39.3" (1000mm) per second
55" (1400mm) per second
500g
1-10cm/s: 1cm/s step adjustment10-50cm/s: 5cm/s step adjustment
50-100cm/s: 10cm/s step adjustment
Eccentric cutter, Blade for small character, Blade for reflective sheet, Blade for fluorescent sheet, Blade for PVC with low-pressure, Ball point pen.
5 ƒÅ½‚¼m (0.0002 in)ƒ¯‚»‚¿
25 ƒÅ½‚¼m or 10 ƒÅ½‚¼m (MGL-IIc) or 0.0004 in
+/- 0.2 mm
Cutter: 10-20g (2g step), 20-100g (5g step), 100-500g (10g step)
Pouncing: 10-20g (2g step), 20-100g (5g step), 100-150g (10g step)Pen: 10-20g (2g step), 20-100g (5g step), 100-150g (10g step)
MGL-IIc
USB, RS-232C, Ethernet
30MB standard, 20MB when sorting
AC 100 V - 240 V, 50/60Hz
100W or less
Temperature: 5-35 degC (41-95 degF),Humidity: 35-75 ƒ¯‚¼¢â‚¬¦ Rh (Non-condensing)
CG-130FXII: 71.8 in x 27.5 in x 47.9 in)
CG-160FXII: 83.6 in x 27.5 in x 47.9 in)
CG-130FXII: 137 lbs. (62 kg)CG-160FXII: 154 lbs. (70 kg)
© 2023, H & H Sign Supply, Inc All Right Reserved.Website Hosted and Designed by NetSource Technologies