White Subliblock By The Yard

Many of today's imported polyester fabrics are dyed with inexpensive low energy dyes that migrate rapidly into attached polymeric material with the application of minimal heat, or slowly over time at normal room temperature. Subliblock films can help prevent dye migrating to your transfer image. Subliblock is a flexible plotter-cut transfer film that contains an additional layer that blocks dye migration from dyed polyester fabrics. Subliblock is available in four (4) colors: White, Yellow, Orange and Red.

Subliblock polyurethane films use dye blocking chemistry to prevent discoloration from polyester fabric caused by dye migration into the film.

► Create your design in graphics software, such as Corel Draw and mirror the image in the effects menu.

► Load Subliblock onto your plotter.

Always test cut to ensure proper depth, speed and down force.

Cut in mirror image.

Weed film from carrier that you do not want to transfer.

Place image on the surface to which you are transferring the film

Place a Teflon sheet between the heat platen and the polyester carrier sheet to prevent sticking and edge damage of the transferred design.

► Heat press between 310deg F - 330deg F for 10 - 15 seconds using firm even pressure.

►If Subliblock only partially adheres to the fabric it is usually because insufficient or uneven pressure was applied. If this happens, reposition the design, increase the pressure and repress.

► Let completely cool before removing the carrier sheet. Peel cold.

► Follow wash instructions for nylon. Turn inside-out, wash and dry at regular settings.

► Adheres to most fabrics.

---