H & H Sign Supply Home
HomeSign ForumBrowse Our ProductsBrandsBest SellersSpecialsNew ArrivalsRecently ReviewedView Cart
Shopping Cart Cart contains 0 Item(s) Total: $0.00
Call UsQuestions? Call us at 866-443-7140 or 270-333-5005 Contact UsContact Us Register or LoginRegister or Login CheckoutCheckout HomeHome

Browse by Category

Customer Service

  • Newsletter Sign Up

Kelly Green ThermoFlex Sport 13.75" x 5 Yard Roll

Kelly Green ThermoFlex Sport 13.75" x 5 Yard Roll
Kelly Green ThermoFlex Sport 13.75" x 5 Yard Roll
SKU: SP-4633-1375-5
For lettering open-mesh athletic uniforms. More details...
Roll Width: 13.75"
Roll Length: 5 Yard
You can earn 32 SIGN BUCKS on this product!
Price: $32.85
Save to my Wish List Tell a friend
Previous Item   Next Item


For lettering open-mesh athletic uniforms


ThermoFlex® Sport is a durable thick film material designed to bridge the gaps in open-mesh athletic jersey.

You can heat press ThermoFlex® Sport at a relatively low (300deg F - 320deg F) temperature and short dwell time (8-10 seconds), which minimizes dye migration from colored polyester jersey mesh.

You can transfer ThermoFlex® Sport to nylon jersey well using the lowest temperature (300deg F) and the shortest dwell time (8 seconds).

ThermoFlex® Sport is available in seven (7) standard team colors: White, Athletic Yellow, Red, Royal Blue, Navy Blue, Kelly Green and Black.

Choose ThermoFlex Sport for use with open mesh polyester athletic jersey. It's thicker properties bridge the openings in the mesh for a smoother finish.
  • Create your design in graphics software, such as Corel Draw and mirror the image in the effects menu.
  • Load ThermoFlex Sport onto your plotter. Always test cut to ensure proper depth, speed and down force. Cut in mirror image. Weed film from carrier that you do not want to transfer. Place image on the surface to which you are transferring the film Place a Teflon sheet between the heat platen and the polyester carrier sheet to prevent sticking and edge damage of the transferred design.
  • Heat press between 300deg F- 320deg F for 8 - 10 seconds using firm even pressure.
  • If ThermoFlex Sport only partially adheres to the fabric it is usually because insufficient or uneven pressure was applied. If this happens, reposition the design, increase the pressure and repress.
  • Peel warm or cold. It is much easier to peel when still warm but for consistent results allow at least 10 seconds of cooling time before peeling.
  • Wash at normal settings.
  • Will adhere to most fabrics. Use the lower temperature and shorter dwell time when applying to Nylon.

All technical information and recommendations are based on tests we believe to be reliable. We cannot guarantee performance, however, for conditions not under our control. Before using, please read our product descriptions and instructions to determine the suitability of each product for your intended use. The user assumes all risk and liability in connection with their use.

Write your own review

 

Rate this product: Like it Don't like it



We accept PayPal, Visa, Mastercard, American Express & Discover Cards
Click for the BBB Business Review of this Signs - Equipment & Supplies in Sturgis KY
SSL
H & H Sign Supply, Inc.
51 Blakeley Rd Sturgis, KY 42459
Mail to: PO Box 258 Sturgis, KY 42459
Toll Free: 866-443-7140
Local: 270-333-5005
Fax: 270-333-5009
hhsignsupply.com® internetsignsupply.com® signpile.com® signsupplystore.com® ssky.com®

All products, services, and company names listed in this web site are trademarks or registered trademarks of their respective holders.

Copyright (c) 2007-2012, H & H Sign Supply, Inc. All rights reserved.